Heavy Duty Chemical tinted Spray chemical Resistant Solid Detailing Spray Bottle with Volume Indicator

ADM's Heavy Duty Detailer's Spray Bottle is designed for various usage, even with harsh chemicals**. The thick resin HDPE bottle and Taiwan's trigger sprayer (Viton) combination offers one of the best spraying experience in the market. Taiwan's sprayer stands out by having better ergonomics, higher quality seals, sprays wider area and not-too-fine mist. The nozzle of the trigger spray can be adjusted gradually from a wide area spraying into jet stream spraying with an output of 1ml per stroke. A filter screen is also fitted at the bottom of the suction tube to prevent large particles from clogging the sprayer. The matte finished bottle has a clear window stripe with graduation for mixing, diluting or indication use as well, making them easier to use. Product Features: - High quality Taiwan sprayer with Viton seals. - Easy to pump, good pumping pressure, sprays wide and fine mist. - Adjustable spray nozzle to fine-tune spraying area for various situation. - Chemical resistant, strong, durable trigger Sprayer (PP) and bottle (HDPE) - Clear window stripe with graduation for quick indication while mixing, checking or diluting. Product Specifications (With Trigger Sprayer): TBA Pro tip: In case of heavy duty chemical usage, flush the sprayer with warm water after each use. This will ensure maximum operating life of the sprayer by removing caustic chemicals that would otherwise cause the internal parts to fail. Caution: - Suction tube may be slightly longer, cut if necessary. - A seal liner is provided. Use in case of leakage. And if seal liner is fitted, refer below: - Bottle decompression may happen, try to loose the sprayer a little from the bottle or don't lock the them too tightly. ** NOTE ** This sprayer is made with Viton inner seals, please check against compatibility chart to know if this seal can resist against chemical of intended use from this website => https://mykin.com/rubber-chemical-resistance-chart EG: Acetone -> Viton -> LEGEND: 4 -> Unsatisfactory. Where as the EPDM - > LEGEND: 1 -> Satisfactory. If value shows > 2 meaning that the seal is not suitable for use and it might fail in short period of time