Tolok Radius, Templat R, Tolok R, Tolok Serong Plat, Alat Pengukur Hardware

Feature: 1. Measuring pitch a. The tooth shaped steel threads that are clamped in the measured workpiece as templates. If they are not closely connected, the other is until they are closely connected. b. Then, the mark on the thread size model is the measured workpiece pitch. 2. Measure the tooth angle a. Put the thread pitch and the thread model of the workpiece to be tested on the top of the same thread for testing, and then check the contact condition. If there is no translucent clearance, whether the tooth angle of the thread to be tested is correct; If there is uneven light transmission gap, it indicates that the measured thread profile is inaccurate. Specification: Part Name: Measuring tool Material: carbon steel Color: As shown in the picture Size: The actual product shall prevail Measuring range: R7.5-15 includes: (7.5 8 8.5 9 9.5 10 10.5 11 11.5 12 12.5 13 13.5 14 14.5 15) R15.5-25 includes: (15.5 16 16.5 17 17.5 18 18.5 19 19.5 20 21 22 24 25) Package Contents: 1*Measuring tool Note: 1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight manual measurement deviation for the data.