Product description
1-Clean the surface of the car lights
2——Put protective stickers around the lights
3——When sanding, it needs to be sanded while spraying water. Please follow the order of coarse to fine sandpaper (320-2000)
4------ wait until the surface dry only apply our product
5——Wrap the sponge with a cloth, pour the medicine evenly on the wipe board, and wipe it one way ONLY!.
1. cuci lampu dgn air, lepastu lap dgn kain hingga kering dan bersih
2. tampalkan tape disekeliling lampu
3. sambil spray air sambil gosok dgn kertas pasir dari yg kasar ke halus(kertas pasir code 320——2000)
4. tunggu lepas lampu kering baru sapu dgn product kita
5. balut sponge dgn kain, letak ubat secara rata atas sponge, dan lap kat lampu secara sehala sahaja
1. Once the damage occurs, cover the area with transparent adhesive tape to prevent moisture and dirt from entering the damaged area.
2. Damage should be repaired as soon as possible to prevent the spread of small cracks.
3. Do not repair it under direct sunlight.
4. The ideal applying temperature is 60℉ to 90℉(15℃ to 32℃). Allow the vehicle to have enough time to adapt to the temperature if it has been in a hot or cold environment.
5. The surface must be clean and dry for proper repair.
6. Do not expose the resin to automotive paint, scraper or plastic facing, because this may cause damage.
7. Not all damage can be repaired and restored to complete optical clarity.
8. Important! In order to reduce the risk of chemical contact with skin and eyes, you must wear safety glasses and gloves when using this product.