Mc.P.P 15g Car Body Compound / Putty Scratch Remover / Filler Repair Kit Paste Fix Care Polish Hilang/Padam Calar Kereta

Product Features:

-- Remove mild to moderate scratches and various stubborn attachments, such as glue paint, tar, bird droppings, etc. without hurting the paint.

-- DIY Treatment of paint defects after touch-up.

-- Black is the background color. You can use this product as long as it doesn't hurt the background color.

-- Suitable colors: various colors

-- Applicable models: various models

-- Simple operation saves time and effort

No hurt to the paint surface when remove mild scratches in the paint

Can be used to remove all kinds of stubborn attachments such as tar, glue and DIY paint color paint defects etc.

Material: waxed

Foam size: 7cm x 3cm x 1.5cm

Ingredients: abrasives, surfactants, fillers

Scope of application: remove slight scratches on the paint surface of the car

Capacity: 30 (ml)/15 grams

Ingredients: abrasive materials, surface active agent, filling agent

Scope of application: automotive paint removal side of mild scratches

Package Contents:

1 X Abrasives

1 X Sponge

【Instructions】

️Clean and dry the paint first

️Squeeze an appropriate amount of abrasive onto the sponge or towel

️Appropriately sand the scratched area until the scratch disappears or becomes lighter

️ Wipe and clean the paint residue with a dry towel

[Mc.P.P 15g Car Body Putty Scratch Filler]

Features:

It is used for filling in the pit with a depth of less than 2 mm on the paint surface, deep scratch or paint surface spalling etc..

Easy to use, repair your car immediately and save money.

It features as non-toxic, permanent and water resistant, long lasting effect and no harm.

Car body putty only, other accessories demo in the picture is not included!

Specification:

Material: Scratch Filler

Package Size: app.9 x 2.5cm/3.54 x 0.98in

Color: As picture shown

Quantity: 1 Set

Use:

1. The basic process:

First with the included 320 # water sandpaper wet depressions or scratches on the grinding process (grinding area should be slightly larger than the recess or scratching Office), and then washed and dried dirt and grease.

2. Filling putty:

Fill the soil thin out the correct amount of filling soil as needed with special spatula filling, slightly higher than the surrounding.

3. Grinding putty:

After fully hardened (about 1-2 hours at room temperature), with 320 # water sandpaper wet grinding smooth. as bubbles form, or when pits, repeat steps 2-3 job.

4. The grinding is complete:

Water with a fine sandpaper 600 # to ensure mend completely wet grinding smooth.

5. Paint finish:

After completion, which can be the easy choice color diy paint paint repair products.

Tips:

Please cover the pen cover after use and keep it in a safe place. Please keep it below 40 °C and avoid direct sunlight.

Do not put it in a place where children can reach it, and then discard it when it is completely used up.

Package includes: