Portable Digital-Controlled Soldering Iron LCD Display Screen Backlight Ready Stock Electric

•LCD digital-displayed soldering iron with adjustable constant temperature is small in shape

•Universal 900M series soldering iron Tip

•It can be accurate to five degrees and it is adjustable it has a top speed (+/-) 

•Quick temperature recovery

•It only needs 8 seconds to warm up to the target temperature

•It is made of wear-resisting, corrosion-resistant and anti-static materials with the feature of high temperature resistance

•Unique thermal insulation design and excellent comfort level of the handle diameter

•Temperature memory function (You don't need to adjust it each time you start the machine)

•Voltage: 220V/110V

•Microcomputer temperature calibration function

•Power: 60W

•Temperature range: 180-480℃

•Input voltage: 110/220V

•Heater tip impedance to earth: <2

•Heater tip voltage to ground: <2M V

•Adjustable temperature value: 5℃

•Temperature error: ±5

•Plug it in and press the red "*" key for the three to five seconds to start is.

•Press the red "*" key for three to five seconds to close it.

•Set themerature according to operating requirements; press the vlue wariming key or the colling key to adjust the temperature of 5℃ each time. The mode after setting will be memorized and stored.

•Numbers on the LCD screen after the temperature is set will change and will stop changing after they reach the setting temperature. At that time, it will be under the constant temperature status and "℃" will flicker at the right bottom of the LCD display screen

•If the temperature displayed on the LCD screen is different from that measured by the thermodetector, its range can be calibrated by the following ways (±50℃/122°F) .

•If deviation of the temperature measured appear after the power is on, you can lightly press the red "*" key to start temperature compensation alignment. 

•If the temperature displayed on the soldering iron is lower than that of the thermodetector, the blue warming key shall be pressed to supplement positive value until its temperature is consistent with that of the thermometer. 

•If the temperature displayed on the soldering iron is higher than that of the thermodetector, the blue cooling key shall be pressed to supplement negative value until its temperature is consistent with that of the thermometer.

•Do Not Touch metal parts of the heater tip so as to avoid being burnt. 

•Do not use it near combustibles so as to prevent fire. 

•Turn off the power supply and cool it down before the heater tip is replaced. 

•Never get wet the electric soldering iron. Do not use electric soldering iron with wet hands. 

•Turn off the power supply at rest and after the completion of the work and place it to the place beyond the reach of children.

•Keep it away from children during the operation in case of an accident.

•1 Electric Soldering Iron

•1 Anti Scald Cover

•1 Solder Wire

•1 Rosin

•1 Sponge

•Protective Case

• #welding #soldering #fixing #diy #ironsoldering