MATEK VOLTAGE SPIKE FILTER XT60-TVS 470uF Low ESR Electrolytic Capacitor 6S LIPO for RC FPV Drones DIY Parts

2x high-power TVS diodes and 1x 470uF low ESR capacitor on board

TVS can absorb huge voltage surge at the moment of plugging battery to protect the connected components.

Low ESR capacitor will reduce the voltage spikes and ripple caused by ESC.

Maximum Operating Voltage: 28V (6S LiPo)

Options

1. TVS diode filter board plus 1 ESR capacitor only unsoldered. No xt60 or Xt30 connector included

2. XT60 female connector with matek TVS diode and ESR connector soldered on, with 10cm 14AWG back and red cables

What is a TVS Diode and How Does it Work?

The Transient Voltage Suppression diode (TVS) is a component that is commonly used for transient protection. (Not to be confused with zener diode or schottky diode.) It consists of a p-n semiconductor junction that becomes conductive during a transient voltage spike. In normal circumstances, it appears as an open circuit despite a small leakage current.

When the voltage on the transient voltage suppressor rises across its threshold voltage(Breakdown Voltage), the avalanche effect of the semiconductor causes the p-n junction to become a low-impedance path that channels away the excessive current. The response time of the TVS diode is extremely fast, often expressed in picoseconds.