Product description
<<<<<<<<< Note: Glue not include >>>>>>>>>
Paint-less Dent Repair Puller Kit Car Dent Repair Tools T Bar Slide Hammer + Glue Puller Tabs for Vehicle 14 Pcs
New design, suitable for different size dents.
High quality tools, automotive body repair tools.
More conveniently taking and operating.
1. Clean the dent with a clean wet cloth.
2. Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes.
3. Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is).
4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue).
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter).
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent.
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen.
8. Clean the repaired place with a clean wet cloth.
Item Name: Car Dent Puller Tool Set
Material: Stainless Steel + Rubber
Features: Easy to Use, Durable, Car Dent Repair Tool
- Due to the light and screen setting difference, the items color may be slightly different from the pictures.
- Please allow slight dimension difference due to different manual measurement.
Car Body Paint-less Dent Lifter Repair Tool Puller with 14 Tabs Hail Removal Tool
Material Type: stainless steel + plastic
Item Volume: Dent Remover Repair Kit help repair the dents on your car
Special Features: remove dents for automobile, refrigerator, motorcycle, washing machine
Hot Melt Glue Gun 20w Glue Stick Gun Thermos Electric Heat Temperature Tool Quick Daily Repairs
Working voltage: 100 to 230V
Working temperature: 356 to 392
1. This series of products can be applied to rubber strips with a diameter of 7-7.5mm.
2. Insert the rubber strip from the end of the glue gun, send it into the barrel, plug in the power supply and warm up for 5-8 minutes. Pull the trigger to extrude the sol and control the amount of glue.
3. During use, if you can't use up one adhesive strip at a time, you don't need to take out the adhesive strip. You can plug in the power supply to warm up for 5-8 minutes and use it next time.