Product description
Product Category: Ice Maker
Material: Food Grade Silicone+PP
Low temperature resistant, soft, easy to demold the hockey puck.
Smooth inner wall the whole body of the container is round and without burrs, and the ice cubes do not get stuck in the groove, so it is easy to demould
Binaural design the ears with concave and convex horizontal bars will not slip your hands when uncovering. It's more convenient to take ice
Deepen the side groove there is a side groove on the silicone cover, and overflowing water will flow into the groove to avoid wetting the tabletop
Water injection reference line. The upper circle of the bottom support is the reference water level
Food Grand PP bottom support More stable, more assured to use, water outlet design, easy to press and shape.
1. Pour water into the lower layer of the mold. The water volume is recommended to be 80% full
2. Slowly press down the upper layer of the mold to out excess water, the water will overflow from the small holes
3. Put the mold in the refrigerator slowly and steadily and freeze for 6-7 hours
4. Take out the mold, rinse the surface of the mold with cold water for about 1-2 minutes, then twist the ice tray to take it out be perfect shape.
Note: Please note that product photos will have a certain color error due to the shooting light problem, please understand!
Dimensions are measured by hand. Please allow 1-3cm size error due to different manual measurement.
Please refer to the actual product, Thank you!
If there is a problem with the received product, Please contact us! We will Respond you ASAP!
Checked before shipment and properly packed to avoid damage during shipping