About this product
- Contains Dangerous Goods?:Tidak
- Diluluskan oleh SIRIM:Ya
- Keadaan Produk:Baharu
Product description
- Double Protection - Extra Seal Cap to Avoid Leaking
- Provide high protection with Auto cut off gas supply
- Convenience for reading of gas cylinder and operating pressure with Pressure Gauge Indicator
- Reduces the risk of natural gas fire, explosion, personal injury and/or property damage With Anti Leak design
- Allows stable pressure and performance
- For normal LPG gas only
- Come With Safety Value & Pressure Gauge Indicator
- Auto cut off gas supply if Gas leaks on hose or gas cooker (100% Cut Off)
- Safe to use with Safety Valve
- Maximum Inlet Pressure 6 bar
- 100% fix to Gas Cylinder Malaysia
- Heavy duty & solid Body
- Shows Balance of Gas in the Gas Cylinder
- Shows Gas Leakage on Hose or Gas Cooker
- Connection: Ø20mm (inlet)
- Inlet Pressure: max 0.6Kpa (Max 6 bar)
- Outlet pressure: 2.8kpa (28 mbar)
- Certification: SIRIM Approved
- Usage: For Normal Household Use Only (Low Pressure)
- Comes with Pressure Gauge – Shows Balance of Gas in the Gas Cylinder
- Product Packaging Box Size (LxWxH): 10x9.5x6.3cm
- Always install the regulator in Gas stove OFF position only.
- In normal condition of use, in order to ensure a safe operation of installation. Its recommended that regulator should be changed every 10 years from the date of manufacturing.
- For outdoor use, the device should be positioned or protected against direct penetration of trickling of water.
- Before installation make sure that rubber gasket in cylinder valve or regulator is in good condition.
- Make sure all taps and appliances are turned off.
- Use LPG cylinders in upright vertical position only.
- Make sure flexible pvc gas tubing is in good condition & not more than 3 years old.
- For rubber Tubing not more than 3 years old.
- Do not try to remove the regulator in Gas switched ON position ever.
- Do not move the cylinder during operation.
- Do not change LPG cylinders in the presence of candle lights of flames.
- Do only use any tools of installation, after hand tightening the nut.
- Ensure that the switch is pointing downward. Place the regulator on the cylinder value
- Turn the switch clockwise so that it points to the left (the "OFF" position)
- Operates the switch clockwise so that it points upward. The cylinder value is now open and gas is "ON"
- To turn the gas "OFF", turn the switch anticlockwise until it points to the left