Xiaomi Mijia Wireless Hair Straight Clip

【 Charge 】

· Insert the charging line into the charging port and connect the charger with 15W or above (to be purchased separately) to connect the power supply.

· The indicator flashes when charging.

· Fully charged, three indicators are always on at the same time.

Be careful

· Please do not use this product during charging.

Tips

· Before using the straight plate clamp, it is recommended to fully charge it to ensure sufficient molding time.

· During charging, the straight plate clamp may generate heat, which is normal.

· After fully charged, please disconnect the power supply in time.

· This straight clip can be charged by using a charging bank and other devices, but the charging time may be extended due to the influence of the power supply.

【 Maintenance 】

· The splint and the body can be wiped with a slightly wet soft cloth.

Warning

· Before cleaning, you must shut down the machine and disconnect the power supply.

· When cleaning, make sure that the straight plate clamp is completely cooled.

· Do not immerse the straight plate clamp in water.

· Do not use corrosive or abrasive detergent to avoid damage.

Instructions for battery removal steps

1. Pry out the shaft cover and push out the shaft.

2. Remove the screws on the inner cover of the handle and open the inner cover of the product.

3. Unscrew the screws of the circuit board and take out the battery.

4. Put the removed battery into the special battery recycling box or hand it over to a professional organization for recycling.

Specifications

-Product name: Mijia wireless straight plate clamp

-Product model: MFZXQ02ZHM

-Rated input: 5V=3A

-Battery capacity: 2500mAh

-Product size: 227 x 43.5 x 42mm