[ReadyStock]Car Interior Lighting LED Strip EL Wire Rope Auto Atmosphere Decorative Lamp Flexible Neon Light DIY

With cold light on the side "with cold light on the side! This product does not need to be glued, and the side is directly plugged into the gap between the door or the instrument panel to avoid installation troubles! Don't worry about the traces left after the glue is installed, the owner can install it independently! Each set of cold light is driven and can be connected to the lamp interface. The diameter of the light bar is 2.3MM, with 6MM sewing edges, which is more convenient to install (the center console can be plugged into the gap directly without glue) The set contains: 1 cold light + 1 USB drive. Buy it and use it directly, thank you. 10 colors: white, blue, ice blue, red, orange, yellow, purple, pink, green, fluorescent green Q: How should I connect it? Answer: It can be plugged in the cigarette lighter plug or the original car line. For example, the line connected to the headlights or small lights is on when the headlights or small lights are turned on. Q: How many meters should I buy? Answer: Generally, the instrument panel needs about 1 ~ 3 meters, and a car door needs about 1 ~ 1.5 meters, depending on the arc of the instrument panel. Measure the size for us or reserve a long point. The excess can be cut directly or hidden into the interior panel. Note: My dear, if you buy it and cut it yourself, you must do a good job of insulation. After the tail end is cut off, do not touch the positive and negative poles to cause a short circuit. The shop is no longer responsible for any after-sale issues once it cuts itself Notes: Due to the difference between different monitors, the pictures may not reflect the actual color of the item. Compare the detail sizes with yours, please allow 0.5-2mm error, due to manual measurement. Please leaving a message before you give the bad feedback, if the products have some problems. Thanks for your understandings