About this product
Jenis WarantiWaranti Pembekal
Product description
solar panel composition and material thickness
1. Solar panel material: PCB board, solder tape, solar cell, EVA, ETFE, black tape, rubber shell, wire PCB: 1.2mm glass fiber
2. Solder tape: 1.2*0.12mm
3. Solar cell: 0.18mm thick, 156 monocrystalline solar cells or 158.75 monocrystalline silicon cells
7. Rubber shell: 120.5*173.5*12.5mm
9.Micro USB, TYPE-C interface
️the standard method of solar cell electrical performance testing and use of the environment
1. After the solar panel is laminated, the main test is the working power.
2. Solar radiation intensity: 1000W/m2
5. Bare board load test using the power value of the load tester
Three: working power test
1. Use the electronic load table, with line test, the load is 12.5Ω, the output power ≥ 4W for qualified
2. Every 2 hours to correct the light intensity
the use and storage of environmental conditions
1. Storage conditions: room temperature, humidity does not exceed 60%.
2. Use in an unobstructed outdoor environment in the sun
3. Working ambient temperature: -20℃~60℃
4. Soldering iron use temperature: 360±10℃
5. Spot welding time not more than 3 seconds, the interval time between multiple spot welding is not less than 30 seconds.
6. Solar panel dustproof and waterproof level: IP66
* 1x Outdoor Security Mount