Authentic Car Headlamp Restoration Spray Vehicle Lamp Polish Restoration

Capacity: 130ml

Shelf life: 3 Years

Scope of application: used in automotive car headlight

Car Headlamp Restoration Spray (Instructions)

1: Use clean water and cloth to clean the headlamp.

2: Most of the car headlamp have a layer of aging or yellow, and this problem should be sand it as far as possible. When you sanding it, we prefer you tie a sponge with the sandpaper(800#) and damp it with water. Sand it until the lights are not shiny, and the entire paint surface feels smooth when you touch it.

3: In a sunny or hot day, you can slowly use the spray to spray a layer on the car headlamp (remember to protect the car, you need to cover the body which beside to the headlamp). remember not spray too many times at once, it will be blurry or cause the headlamp foggy.

4: It is better to expose the car headlamp under the sun after spraying. Don't let dust fall on it during the drying process. (Remember that after 30 minutes of exposure, it will only become dry. The car headlamp may be some sticky, you don’t need to clean or wipe it, just leave it under the sun above 4 hours. After that, the surface of the car headlamp will be smooth.

*Please be sure to choose a hot day or a sunny day during the headlamp restoration to avoid suddenly rain or other factors causing the process.

Cautions :

- Keep away from fire, heat or flammable sources, may cause explosion or burning