About this product
Jenis WarantiWaranti Pengeluar
PaparanLED
BrandEV Outdoor
Product description
EV PHEV Car Portable Charger Type 2 LED Screen Waterproof 16A 13A 10A 8A 3 pin 5 Meter UK Socket
Flexible and Easy to user Portable EV charger allowed you to charger everywhere where a 3 pin socker available!
Faster charging where allowed 4 mode of selection.
Suitable for ALL Type 2 (IEC 62196-2) cars including all Mercedes, BMW, Volvo, Tesla, Renault, Nissan, Hyundai, KIA and many more EV (BEV) and PHEV car models.
- 4 Mode Selection (Touch Button)
e.g 10.7kWH PHEV car battery required *2.89Hours for full charged (10.7kWH / 3.7kWH)
*depend on temperature and SOC of the car battery
- Color LED Screen (display real time charging status, total kWH, Total Hours and many more)
- Auto Cut Off when overhead/overload >85celcius
- Auto Current adjustment when charging (depend on the SOC of the car)
- IP67 Water and Dust Resistance
- Support cable lock during charging
************************************************************************************************************
Type 2 Black Color Extension Cable: (For Charging Tower Usage Only, Not for EV charger extension usage)
*************************************************************************************************************
- 5 meter or 10 meter in length
- Type 2 : Male and Female Socket (Extension)
- Support up to Single Phase 32A 7kw
- This item for Charging Tower Usage only, NOT for 3-pin EV charger Extension usage, Please do take note.
(This item is NOT support your home / original car charger on 13A cable length extension), use for 32A, 7kw support charging tower/Pole (e.g Petronas)
- Type 2 : Mercedes BMW Volvo Tesla Hyundai KIA Supported
What is IP54 Water/Dust Protection?
Dust: Ingress of dust is not entirely prevented, but it does not enter in sufficient quantity to interfere with the satisfactory operation of the equipment; complete protection against contact.
Water: Protected from water spray from any direction.
*For normal house power socket using, please use 13A / 10A below to ensure the safety for not OVERLOADING to introduce fire risk. (16A dedicate to the high ampere support socket not for normal power socket)
The cable should be kept out of puddles but can be kept outside in the rain
Please remember to use the rubber cover to keep moisture from the connector when not in use. The vehicle will not charge if it senses moisture.
Warranty notice: (Please do read carefully)
-Manufacturing defects warranty 1 year (with product defect)
-Wiring issue causing short circuit (or any man made mistake) not cover under warranty.
-Any wear ant tear is not cover under warranty.