2. When the windpipe is connected, the negative pressure in the kettle will be generated and the waste oil will be sucked out. Add new oil at the same time.Keep the air intake pressure of the air pump at 6-8bar.Easy to use.It saves you the trouble of pushing the brake pedal back and forth.
3. Easy to operate, one person can finish brake fluid replacing work.
4. Without dirty oil stained on the floor. Abandoning the traditional tiring and boring oil replacing method.
5. Universally works for cars,motorcycle.
6. Say goodbye to the job of two persons. Say goodbye to dirty oil stained on floor. Say goodbye to the traditional tiring and boring oil replacement method
How to use:
1. Take away the dirty brake fluid from the tank;
2. Put in the new fluid back;
3. Start the car and connect the hose between the equipment and the brake branch pump;
4. Twist the screw to be loose,but not completely.Then open valve to start siphoning the fluid out.Please turn off the valve after screwing when it finish.
5. Our tool fit for universal cars,you can use the tapered spout which is offered in the package avoid air leaking;
6. Please lift the tool over the brake pump to ensure it work properly.