FULL COPPER MOTOR S/STEEL chopper rumput, penghancur rumput napier, chopper napier, Green Feed electric grass cutter

ready stock！！！

1. How much can the grass cutter cut per hour?

Answer: about 600kg of grass can be cut during normal work without interruption

2. Cut grass machine motor using several boxes of power?

Answer: The motor uses 220v household 2 boxes of electricity, and it can be used for general lighting.

3. What is the power of the motor?

A: We measured motor power of 1.5 kilowatts, voltage is 220v, current 6.65A, the rotational speed is 2600 to 2800 rev / min

If you want to order 1 or more orders, please place an order separately.

This is to avoid logistics problems, thank you.

Loosen the four motor screws

Adjustable thickness

It can be cut thick, thin and sliced

The motor moves forward, and the thicker it is cut.

The motor moves backward, and the finer it is cut.

1. Cuttable objects -- various silage feeds, vegetables (sweet potato vine, cabbage, sweet potato, green vegetables, etc.), grass (with rhizome), green grain straw, green corn straw, green wheat straw and other green feeds can be chopped.

2 scope of application - it is applicable to the shredding of green feed in large and small farms (chickens, ducks, pigs and sheep, etc.), dairy farms, agricultural pastures and other farms. It is an ideal grass cutting machine for farmers

3 (precautions) -- too soft grass (rootless), hay and dried orange stalk cannot be cut. For this kind of grass, we need to choose our dry and wet Dicer combination hay cutter.

1. Before starting the machine, you must read the instruction manual carefully, and carry out adjustment and normal maintenance.

2. The supporting power must meet the requirements. It is not allowed to increase the spindle speed without permission.

3. Before starting the machine, check whether the running direction is the same as the cutting direction, otherwise it is strictly forbidden to start the machine.

4. The materials that need to be cut should not be mixed with hard objects such as metal and stones, otherwise the machine will be damaged.