OBDII Diagnostic Car OBD OBD2 Meter Digital Scanner Alarm Speed Gauge display Hud Water temp RPM turbo boost at500

AT500 works on all 1996 and later 12V gasoline and diesel vehicle that are OBD II compliant.

It can identify the cause of your CHECK ENGINE and perhaps fix it.It canhelp you easily passing annual emissions tests and SMOG CHECK.

It covers full OBDII/ EOBD diagnostic functions for engine system, O2 Sensor test,EVAP systems test,and on-board monitoring test,can give youfull control of your vehicle's running status,while graphical and numeric data stream display will help you to find out the faulty sensor readings.

AT500 can read common fault codes and can help to find the problem quickly and accurately, thus to achieve quick vehicle repair.

It support multi-languages, you can Find Tool Setup, then select the language you like.

2.Technical Parameters

Voltage Measurement Range: 6-18V DC.

3 . Button

1.ESC : exit

2.I/M : quick enter I/M Readiness

3. : up

4. : down

5. : right

6. : left

7.OK: Enter

8.: Engine system operates normally without fault code

9.:Engine system is abnormal and there is pending fault code

10. :Engine system is fault, and check engine light on.

4. Function and Feature

1.Voltmeter function,And battery level indicator ,etc.

2.Crangking System Test ,Analyze the state of the cranking system , display the cranking voltage,and the cranking time.

3.Graphs the waveform of the Cranking System

4.Charging System Test, Analyze the state of the charging system, display the ripple ,unload and load voltage

5.Graphs the waveform of the ripple test

6.Works on all 1996 and later OBDII compliant US, European and Asian vehicles

7.Easily determines the cause of the Check Engine Light(MIL)

9.Turns off Check Engine Light(MIL), clears codes and resets monitors

10.Displays DTC definitions on unit screen

11.Views freeze frame data

12.Displays monitor and I/M readiness status (emissions)

13.Identifies pending codes

14.Read live PCM data stream

15.Displays live O2 sensor test data

16.Graphs data (1996 and newer)

17.Reads, stores & playbacks live sensor data,DTC data,and freeze frame data.

18.Performs modules present test

19.Retrieves vehicle information (VIN, CIN and CVN)

20.Supports CAN (Controller Area Network) and all other current

21.OBD-II protocols

22.Built-in OBD-II DTC lookup library

23.Large easy-to-read backlit LCD screen

5.Main Menu

5.1 Choose “ Diagnostic “ For OBDII Diagnosis

(2) After OBDII Connected Well On Car, show "Monitor Status"

And click “ OK” For next Step (Diagnostic Menu) To look through below 9 functions:

Read Codes

Erase Codes

I/M Readiness

Data Stream

Freeze Frame

O2 Sensor Test

On-Board Monitoring

Evap System (mode$8)

Vehicle Information

5.2 I/M Readiness: Select [I/M Readiness] and press OK button, the screen will display the interface as shown below:

3 . Button

1.ESC : exit

2.I/M : quick enter I/M Readiness

3. : up

4. : down

5. : right

6. : left

7.OK: Enter

8.: Engine system operates normally without fault code