1000W DSH-A PVC Welding Kimpalan

Specification Model : DSH-A PVC Welding Gun Power : 1000W Color : Green Sizes : 34cm(L) X 6cm(W) Voltage : 220V Frequency : 50HZ Temperature :40-550℃ Air pressure : 2942pa Insulating intensity : 1250V Applicable to : defense engineering, anti-corrosion chemical, electroplating, pharmaceutical and rural, fishing village, island and other places of plastic, PVC installation, as well as farm tools, fishing gear repair Features : 1. This is a plastic welding technique which is analogous to gas welding of metals, though the specific techniques are different. 2. This specially designed heat gun (hot air welder) produces a jet of hot air that softens the parts to be joined, as well as the plastic filler rod. 3. Hot air/gas welding is a common fabrication technique for manufacturing smaller items including and not limited to chemical tanks, water tanks (black, grey, fresh & ballast), heat exchangers, and plumbing fittings. 4. The materials being welded and the welding rod must be of the same or very similar plastic. Welding PVC to acrylic is an exception to this rule. 5. Plastic plate welding repair of various plastic parts of various plastic material decoration of the welding, the instrument of the dust, moisture, electric motor drying. Use : 1. Before using the heater power to the lowest level. 2. Use the knob should be rotated to 1, blowing a few minutes, until the barrel cooled and then shut down. 3. Do not touch the barrel when operating, so as not to burn. Includes : 1 x Hot Air Gun 2 x Nozzle 1 x Roller