About this product
Jenis WarantiTiada Waranti
Product description
- 6 in 1 Set Tyre Repair Kit
- Easy to use. No need to jack your car
- Same concept when you send to the tyre shop
- Can DIY especially during emergency time
- Save money, save time, save energy
- Even an old man/ woman can use this. easy-peasy
- One of the Must have item in your car/motorcycle
1. Remove the nail and insert the Spiral probe in the puncture hole
2. Rotate the Spiral probe in each direction to clean and expand the hole
3. Take a Repair Strip from the pack and insert in the eye of the Split-eye Insertion tool. You can see picture of the split-eye of the tool above
4. Pull the Repair Strip through the eye so that both sides of the strip are equal in length
5. Apply little amount of Rubber cement Solution over the Spiral probe and insert into the tyre to cover the hole
6. Now remove the Spiral Probe and immediately insert 2/3rd of the Repair Strip into the hole with the help of Split-Eye Insertion Tool
7. Twist the Insertion tools 360 degrees and pull out. The Repair Strip will plug the puncture hole and the tool will come out clean
8. If you have a knife, you can trim the excess length of Strip protruding out, but I have left it as it is as this will flattened in due course.
9. Attach the pump and fill air. That's all you are done
This repair kit should not be used to fix tyre with punctures bigger than 1/4' and should only be used as temporary fix, to allow you to reach your destination safely then you can repair your tyre permanently.
Do not try to repair any sidewall puncture.