Product description
> Colour : BLACK /BLUE / ORANGE / TRANSPARENT
> Material : Polyurethane Tube
> Maximum Pressure :145Psi
> Working Temperature : -4℉~176℉
> High Flexibility Strong Restoring Force, no Deformation With Bending, resistance To Oils With No Corrosive
> Compression-resistance (in Usual Temp) 0.8mpa(8.5kgf/cm⊃2;).
> Tensile Stress: 550kg/cm⊃2; Product Feature : High Flexibility Strong Restoring Force, no Deformation With Bending.
> Use Range : Pneumatic Pneumatic Tools; Instruments, mechanical Gas Pipeline; Laboratory Automation Equipment; General Industrial Water And Gardening.
> Using Flexible, Has High Elasticity To Restore Memory Effect,folded Without Creases, And The Hand Feels High Toughness. The Surface Of The Hose Is Smooth And Flat,The Color Is Bright.
> Light-weight; Abrasion And Chemical Resistance;tasteless ; High Mechanical Strength, Minimal Pressure Loss; Convenient For Piping As It Has Better Flexibility Than Nylon Tubes.
> Air Compress Hose Working Medium: Compressed Air, Vacuum ( Not Other Gas Or Liquid); Application Of Air Tube: Used For Piping Of Pneumatic Devices.
> Exhaust The Pu Tube To The End And Then Let Go, The Pu Tube Will Immediately Return To Its Original Appearance, No Creases, High Elasticity Recovery, Anti-aging.
> It Must Be Under The Rated Working Pressure And Temperature, If You Want To Keep This Pu Tube In A Long Term Service Life. As Temperature Rise, Working Pressure Shall Be Reduced Correspondingly, If Go Beyond The Limiting, The Tube Can Rupture.
> Do Not Use for Fittings for Drinking Water Tubes.
> Do Not Use Fittings under Extra External Load (Bend, Twist or Pull), Otherwise It will Cause Damage or Leakage.
> It Must Be Under the Rated Working Pressure and Temperature, if You Want to Keep This Pu Tube in a Long Term Service Life. As Temperature Ris
> Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
> Due to the manual measurement and different measurement methods, please allow 1-3mm deviation. Thanks!