Introducing our latest product, the 'epoxy resin 10kg (10 unit of 1KG Packing)'! Each package contains ten units of one kilogram each, with Part A (750g) and Part B (250g) in each packaging. Our product is a hard type epoxy resin that's suitable for jewelry, river tables, tabletop coatings and more. Do take note it need to do layer by layer ya. Each layer not more than 1cm thick until previous layer fully cured.
Please note that you can only order a maximum of two units per order, which means a maximum weight of 20KG per order. Its color is crystal clear and transparent but can accommodate added colors.
This hard type epoxy resin requires about twenty hours for one centimeter thickness to be fully cured at room temperature which means you need to leave it for forty-eight hours for it to fully harden.
Here's how you can use our product:
Firstly please clean your mold and your desired product before using the epoxy.
Secondly kindly mix Epoxy Resin A : B in Weight Ratio about three parts Epoxy Resin A : one part Hardener B. We suggest mixing nine grams of Resins Part A with three grams Hardener part B as minimum mass materials are required to ensure proper curing.
Thirdly pour both parts into an empty plastic cup weighing twelve grams total weight
Fourth stir slowly until its mixed properly
Fifth wait five minutes before pouring into mold
Finally remove any bubbles formed during application using toothpick or any suitable tools and let it cure within sixteen hours minimum.