10PCS Waterproof Solder Seal Heat Shrink Butt Connector Lug Tube Insulated Terminal Car Wire Wiring Automotive Wayar

- Insulation: PE

- Plating:Tin

- Terminal Body: copper

- Shrinkage ratio is 2:1

- Operating temperature range: :-55 - 125

- Minimum shrink temperature: 80C

- Minimum temperature for solder to melt: 138C

- Complete melting temperature for solder: ＞160

- Dielectric strength :1kv

- Protection Degree: IP67

How to use:

- Run one wire through the butt connector tube of appropriate size, have the wires connected and treated properly, and move the connector such that the solder ring section is aligned with the wire connection;

- Heat the solder ring with a heat gun until the ring melts and penetrates into the wire connection;

- Heat both ends of the tube using a heat gun so that they shrink. The waterproof rings when heated turns into waterproof rings;

Warning: Heat the heat shrink tube section until it shrinks tightly around the wires; excessive heating will melt down the heat shrink tube completely. The solder ring must be heated to a full melting so as to penetrate into the wire connection.

 

Package includes 10pcs of terminal for selected size.