About this product
MCMC ApprovedTidak Berkaitan
Diluluskan oleh SIRIMTidak Berkaitan
Product description
M7 7.0" = M7 TB-7305X/F / TB-7306X Gen 3 4G LTE 7.0"
M8 8.0" = M8 / M8 2nd Gen TB-8505X/F 8.0"
M10 10.1" = M10 HD Plus 2nd Gen TB-X306X 10.1"
M10 10.3" = M10 FHD Plus TB-X606X/F 10.3"
M11 11.0" / Xiaoxin Pad 11.0" / K11
P12 12.7" / Xiaoxin Pad Pro 12.7"
HARD TO INSTALL / THIS IS NOT A TEMPERED GLASS
**This protector need some skills and techniques for installation. Strongly recommend look for experience Mobile Shop for installation if lack of confidence to avoid bubble/dust dot
1. Japan imported materials, high permeability-type material produced.
2. Surface protective film processing by the wear scratch durable.
3. Protective film by the anti-ultraviolet treatment to prevent ultraviolet damage to the LCD screen, to the role of further protecting the love machine.
4. Can reduce the reflection rate of 90% light transmission rate of 95%, clear and vivid picture, not easy to produce bubbles when the foil.
5. Clear / Matte Anti Finger Print Paperlike / Anti Blue Clear / Anti Blue Matte Paperlike
1, first with a small cloth to wipe the screen clean surface dirt.
2, and then determine the direction of paste sequence, and tearing small sections labeled "①" shape from the film, ready to paste.
3, in the film, first tearing part of the "shape from the film" at the screen and paste it, then stick side torn edge, until completely fit well.
4, posted a good protective film, and then tear marked with "②" second layer "shape from the film."
5, the last complete tear "shape from the film," you can use.
foil before make sure no little dust on the screen, so that after the dust stick found difficult to deal with.
film when the film keep abreast of the fingers to avoid contact with veneer, in order to avoid leaving the veneer of dust, fingerprints, and other bubbles.
best to ensure a good stick, to avoid leaving dust stick again when, after the paste bubbles.