Product description
Product: Self-adhesive trouser sticker
Scope of application: clothing
Color: black, gray, white, beige, blue
1. Spray the water to squeeze out the water droplets.
2. Flat (slightly wrinkled) on the inside of the trouser and turn up the center of the joint (white silk facing down).
3. Use a steam iron (temperature between 130°C and 160°C) to scald (without moving) from the tape end for 15 seconds, and then it will be fine.
Convenient for those who do not have a sewing machine, helps you shorten the length of the pants you want. (Warm Tip: If it should come off, you can re-bond it with an iron again.)
Suitable for thick fabrics work clothes, jeans, trousers, curtains, tablecloths, bedspreads, etc.
1. Kain pakaian yang digunakan mesti tahan suhu tinggi Dari seterika
2.Beberapa seterika murah mungkin tidak mencapai suhu yang
Mencukupi dan boleh menyebabkan kegagalan dalam penggunaan
3. semasa menggunakan pastikan jalur putik menghadap ke bawah.
Jika sebaliknya penggunaan mungkin akan gagal.
4. Sila rujuk video pada halaman produk semasa menggunakan.
-----------------------------------------------------------------------------------------------------
1.The clothing and pants fabric used must be able to withstand the High-temperature ironing
2. Some inexpensive irons may not reach the required temperature leading to usage failures
3. When using,please ensure that the white lines are facing downwards.Reversing them may
4.Please refer to the product page video for usage instructions.
1, The real color of the item may be slightly different from the pictures shown on website
caused by many factors such as brightness of your monitor and light brightness.
2, Please allow slight (±3cm)manual measurement deviation for the data.