QINGLONG ROOFING WATERPROOF COATING 5KG Weather Resistant Decorative Blue Grey Non Woven Fabric Bumbung Bocor Tampal Water Leakage Kalis Air Bumbung Retak

It is produced by combining acrylic emulsion with other additives using foreign advanced technologies and materials.

Product Features: 1. Using water as a dispersion medium; non-toxic, odorless, non-polluting, it is an environmental-friendly product; 2. Single component, cold application, it can be applied by brushing, rolling, spraying, scraping etc.; 3. Excellent resistance to aging, elongation, elasticity, adhesion and firm formation; 4. The waterproof layer is a closed system with overall good waterproof effect, especially suitable for the application of special-shaped structural base layer; 5. Can be used as a colour protective layer for the black waterproof layer of rubberized asphalt to achieve a beautifying effect.

Application Range: 1. Suitable for waterproofing and heat insulation of short-term water-immersed areas such as metal roofing; 2. Especially suitable for roof waterproofing of thin-shell structures. It can also be used as adhesive or exterior wall decorative coating; 3. Suitable for waterproofing and decoration of old roofs.

Application Methods:

1. Base surface preparation: The base surface must be flat, firm, clean, no water and osmosis, dents, cracks and leakage must be fixed first, internal and external corners to be made round.

2. Coating:

a. Apply it with a roller or brush;

b. The coating (especially the primer) should be constantly stirred even when in use;

c. The coating should be applied evenly without precipitation;

d. Apply a new coating on top of the other when the previous layer is not sticky to hand;

e. Each layer must be coated according to the specified quality. It should not be too thick or too thin;

f. Use the non-woven fabric to strengthen smaller parts. After applying the first layer, paste the non-woven fabric without using water; thereafter apply the second and third layers.

3. Recommended Amount: 1.5～2.0mm thick (1.5～2.0kg/㎡)

 

Recommended Tools:

Brush, spatula, float trowel, electronic mixer, mixing bucket