Samurai Spray Paint Plastic 1K Primer KPP KP1 U19 Aerosol Spray Motorcycle Car Coat Grey White Red samurai spray Black Silver

Facing the problem of paint peeled out easily from plastic products? Plastic Primer is the solution for you! It is sprayed on any plastic products as an undercoat before applying your favorite color coat. Samurai Plastic Primer serves as a protective layer to the plastic parts of your favorite bike.

● Its mixed ingredients allow it to stick to any type of plastics and it functions to bite the upper layer of paint.

● Also recommended for use on aluminum and galvanized steel.

● Guarantees sticks strong paint sprayed on it.

● Hide the scratches due to accidents.

● Protective layer to the plastic parts of your favorite bike.

● Useful as a protective layer.

Samurai Anti-Rust Primer U19 400ML

• Samurai focuses on repainting business

• It is an advance spray paint formulation specially made for DIY fanatics to get the best finishing to the wide range of surfaces.

• It works by penetrating deeply into surface and forms an air and water tight barrier

• Provides high anti corrosive protection and long-lasting durability

• No lead and chromate

• Good insulation against humidity

• Ideal use on new or slightly rusty surfaces to prevent further corrosion

• Non-Yellowing, Non-Cracking, Non-Tearing

• Guarantee highest product quality results, just like with a spray gun in a workshop.

• Easy to use, no extra equipment needed.

• Protected against corrosion and chemical materials.

• Resistant to natural chemicals

• Safe for use on all conventional paint systems.

• Increase the top coat adhesion.

• Weather Resistance

• Excellent abrasion resistance against scratches

• Good harness and adhesion

• Excellent coverage good hiding power

Samurai Spray Paint KP1 Putty Primer

Tip for best performance:

After you sand the surface with water and let it dry, spray slightly far from project for the first layer and wait 5 minutes. Then spray it normally with distance 15cm to avoid biting.

Step :

1) Sand and wash the part to be painted. The previous clear coat should be sanded off with an 800/1000 grit sandpaper and washed properly so no dust, grease or any other dirt is on the item.

2) Spray Samurai KP1 Putty Primer as primer for plastic parts or 2K04 Epoxy Surfacer, 2K05 Red Oxide Anti-rust Surfacer or 2K06 Silver Grey Anti-rust surfacer for metal parts. (1 Layer)

3) After the primer has dried, the surface must be sanded again with 800/1000 grit sandpaper and washed. After sanding with 1000 grit sand again with 2000 grit.(If this step is skipped, the final result will still have a glossy finish, but with this step, the final product will have a mirror finish)

4) Spray the undercoat/base color coat if using the fluorescent colors ( UC1002 U/C Flourescent), bright colors such as red, yellow, etc (2/102 White), Khameleon 3D Paint (30/109 Black) and 2-coat system. If dark colors like black or grey, no need for the undercoat. (2-3 Layers)

5) Spray the top color coat. (2-3 Layers)