KTM 6 Pin to OBD2 Fault Code Scanner Diagnostic Motorcycle Tool

6 pin Plug Adapter for use with KTM motorbikes using the 6 pin K-Line / CAN-Bus connector. This adaptor converts a standard 16 pin OBD2 type plug to the KTM 6 pin plug for plugging into the motorbike diagnostic socket. This covers CAN-Bus and K-Line communication. Will also work with other manufacturer models such as Husqvarna 701, which is essentially a rebadged KTM. Used with the amazing free TuneECU software or any OBD2 hardware/software. Compatible Motorcycles 2017+: KTM 990 LC8 KTM 1190 RC8 KTM 690 Duke ab 2011 KTM 690 Supermoto KTM 690 SMC und Enduro KTM Duke 125 KTM Duke 200 KTM Duke 390 KTM RC 125 KTM RC 200 KTM RC 390 Husqvarna Vitpilen 401 Husqvarna 701 Svartpilen 401 *** support Android and iOs This adapter is to be used exclusively for KTM motorcycles! Although the 6-pin OBD connector is the same as Kawasaki motorcycles, the occupancy is different. 1 x KTM OBD2 Cable 1 x Elm327 OBD2 Diagnostic Adapter PLEASE BE ADVISED THAT THIS WILL NOT WORK WITH THE 2012 AND LATER BIKES WITH “FLY BY WIRE THROTTLE”. SOME BIKES MAY HAVE A DIFFERENT PIN OR OBD PORT LAYOUT. CHECK YOUR PORT FIRST BEFORE BUYING THIS SET. RETURNS DUE TO INCOMPATIBILITY (WITHOUT OR AGAINST OUR ADVISE) WILL BE SUBJECT TO OUR TERMS AND CONDITIONS. #ktm #ktmindia #ktmduke390 #ktmduke #ktmrc200 #ktmrc390 #ktmracing #ktmrc #ktmofficial #ktmfamily #ktmduke200 #ktmduke125 #ktm250 #ktmlove #ktm390 #ktm200 #ktmexc #ktmlover #ktmkerala #ktmbikes #ktmduke250