MILUX M-268F M268F HPG GAS REGULATOR ( HIGH PRESSURE ) KEPALA GAS TEKAN TINGGI

- WITH RM1,000,000.00 PRODUCT LIABILITY INSURANCES COVERED

- Connection : Ø20mm (inlet)

- Inlet Pressure : max 0.05- 1.0Kpa (0.5-10 bar)

- Outlet pressure : 0 ~0.2 kpa (0~ 2 bar)

- Rate Flow: 0-0.6 Kpa (0-6 bar)

Package weight : +/- 370g

- Usage: For Commercial Use Only (High Presure)

- Usage: For Normal Liquefield Petroleum Gas Only

- 100% fit to Malaysian gas cylinders.

- Certification :

- S.N.I. (Indonesia National Safety Standards)

- SIRIM (Malaysia Safety Appliances Department)

- With SAFETY VALVE

- 1 MONTH WARRANTY

- SIRIM APPROVED

- MADE IN MALAYSIA

- ORIGINAL PRODUCT

- READY STOCK

- FAST DELIVERY

Before using the regulator, please read the instruction carefully

:

- Use only for L.P Gas only.

- Use only approved hose and hose clips to fix the regulator and appliance

- Do not disconnect from the gas cylinder while the appliance is still in use (alight) this action can cause serious fire accident.

- Do not expose the regulator direct to hot or cold weather condition.

- In case of any leak do not switch "ON" or "OFF" electric switches or light any matches or lighter, or any other source of flame.

- Please use soap water to detect the leak.

:

- Place regulator onto the cylinder valve with the knob pointing downwards.

- To lock the device to the cylinder turn the knob clockwise to 9 o'clock position.

- To supply the gas, turn the knob to 12 o'clock position.

- To cut off gas, turn the knob anti-clock wise to 9 o'clock position.

- To disconnect the device from the cylinder, turn the knob anti- clockwise to 6 o'clock position.