Product description
The correct way to turn on the UV light:
1. Charge for 3 hours first.
2. Turn on the switch on the left.
3. Need move away (>1.5m) from the toothbrush holder.
Includes toothbrush holder, toothpaste dispenser, UV toothbrush sterilizer.
1. Wall mounted UV toothbrush sterilizer, easy to attach it on the wall with the double-sided adhesive tape.
2. Solar& home lighting powered, no plug required and no batteries to replace, which is safe and economical.
3. Infrared intelligent sensor lamp at top left corner, the infrared intelligent induction system ensures a effective sterilization yet avoid the harmful UV light.
4. Compact and hollow out design ensures good ventilating, hard to breed bacteria.
️【Product Specifications】
Name: Toothbrush sterilizer
Product category: Toothbrush holder
Charging method: Solar charging and USB charging
Placement method: Paste and place
Product size: 190 * 125 * 47mm
Toothpaste mouth diameter: About 12mm (Toothpaste mouth over 12mm will not support to install)
Working humidity: 30-90% RH
Battery capacity: 1200mAh
1 * Toothbrush sterilizer
* After charging the product for about 3 hours,turn on the switch on the left side, the power indicator will light up.
* When no one approaches, the ultraviolet sterilization will work automatically (blue light on), and when someone approaches, it will stop the sterilization (blue light off).
* Install toothpaste: Unscrew the toothpaste cap first,turn the toothpaste clockwise to fix it.
* After fixing the toothpaste, squeeze the toothpaste vigorously until the air in the device is used up, you can see that the toothpaste can flow out.
* When the human body approaches the toothbrush holder, it stops working, and when the human body moves away 1.5m from the toothbrush holder, it starts working. Each disinfection time is about 3 minutes.
For UV Light, If it detects movement infront of it, the UV light wouldn't turn on.
You may try in this way. Place it on the table like this and make sure it's facing up and there's no fan up infront of it. After around 1 minute, it will automatically turn on the UV light and the disinfection process will run around 3-5minutes to sterilise.
After that, it will then turn back to ready mode. Once it detects movement, it will then turn off the UV light. Hope this clarifies